TSUKASA Tsukasa's “High performance filters & strainers” for use in facilities that handle various fluids.
We can meet your requirements for contamination control, reduction of environmental impact, cost management, and realization of compactness of facilities.
HOME Product information Corporate information For inquiries Site map
HOME > Product information > Quick-maintenance small filters
Precautions for use
●Before removing the filter, be sure that there is no residual pressure inside it.
●If there is residual pressure, be sure to slacken the drain bolt to relieve the pressure, and then remove the filter.
●Do not remove the filter while pressure is applied to it.
●Do not use the filter at a pressure that exceeds the maximum working pressure.
●Do not use the filter outside the working temperature range.
●Do not dismantle the filter.
Quick-maintenance small filters LC series
Features
This is a stainless steel line filter series that permits maintenance of the element using a one-touch operation without any need for tools.
The filter element can be withdrawn by simply sliding the sleeve on the outside of the casing and pulling out the head.
Specification
Applicable fluid
Water or oil
Maximum working pressure
1MPa
Working fluid
temperature range
NBR
-20℃~+80℃
Viton
-20℃~+150℃
Material
Name
Material
Main body
SUS304
Element
SUS304
Seal
NBR / Viton / EPDM

Corporate information
Copyright 2016 Tsukasa co., Ltd. All Rights Reserved.